You'll require Coil Spring Compressors when fitting a lift kit.

These are suitable for compressing springs on vehicles when changing the springs or shocks. 

They can also be used for the insertion of coil spacers. 

Instructions for use:

Remove strut from vehicle and attach compressor.

Tighten compressor up until spring pressue is taken up.

Disassemble strut as required.

Compressor should be left on spring during servicing. 

Car Interior Removal Tool

• Enables easy removal of car panel upholstery.
• Removes panel clips without damaging surround areas.
• 235mm Door Upholstery Clip Remover 
• For quick release of door panels and upholstery clips. 
• Can be used for nearly all vehicles.

​Colour may vary. 

Jump Lead Clips 

Heavy Duty Jump Lead Clips, With Colour Coded Handles and Heavy Duty Springs.

Suitable for making a set of jump leads with our anderson connector leads.

Crimp to the cable.

Land Rover 200/300 Tdi Head Gasket Torque Angle Gauge

Used for precise torque adjustment on the head bolts of Land Rover engines when changing the head gasket. As outlined in the workshop manual.

For a 1/2" drive breaker bar.

Land Rover, Range Rover, Series, Defender Discovery, Brake Caliper Rebuild Tool (Land Rover tool number DA1153)

The most akward part of rebuilding a set of Land Rover brake calipers is fitting the dust seal after the pistons have been fitted.

This kit has been designed and made to help you! It is supplied with the tool to fit 41mm and 44mm pistons and comes complete with a heavy-duty piston spreader to allow the seals to be pushed into place evenly.

Suitable for Land Rover and Range Rover models with disc brake calipers that have 41 or 44mm pistons.

Kit Contains:

• Heavy Duty Piston Spreader
• 41mm Seal Cap
• 44mm Seal Cap

Land Rover TD5 Starter Motor Solenoid Overhaul Kit

A comprehensive kit to overhaul the Starter solenoid on your TD5

The bearings and motor in the TD5 starter are very strong, it's achillies heel is the solenoid.

For a fraction of the price of a new starter you can overhaul the solenoid and it will be good for another 100k miles

We are super impressed by this product. Ideal for working on your car

Inspection Work Lamp - 60 SMD
Rotating Magnetic Work Lamp

• 60 Super Bright SMD LEDs
• Hi/lo light output modes
• Outstanding 1200 Lumen Light Output
• Built in 7.4V 2600mAh Li-ion battery
• ABS plastic construction
• Superstrong magnetic swivel mounts
• Intergrated hanging hooks
• Used by Jedi Knights
• 230V Charger
• 12V DC vehicle plug.
• Charging time 6 - 7 hours
• 2 hours continuous operation.

With Hooks and Magnetic support providing
multiple uses Indoors and outside.

Mini Gravity Feed Spray Gun 120ml Nylon Cup 0.8MM

• Air Consumption:8 CFM
• Cup Size:120cc
• Nozzle Size:0.8-1.0MM
• Working Pressure:2.0-3.0bar

Oil or Diesel Filter Strap Wrench.

Simply slip over the filter and turn to grip and undo.

• Easily removes Oil or Diesel  filters up to 120mm without damage
• Made from metal & nylon webbing
• Use with a 1/2" square drive or a 13/16" AF open end spanner