A Crank Shaft locking tool & pulley puller. 

An essential tool for changing the timing belt, especially on automatic vehicles. 

(Colour of case may vary)

This EGT gauge kits come with a 1/8 NPT type K thermocouple EGT probe that can be installed to either your exhaust manifold or exhaust pipe also comes with weld on bung for alternative installation on the header

Specification 

Gauge: 

• Dimensions: 79mm x 43mm x 25mm.
• 12v DC connection
• Super Fast Response time   
• Temp Range: Celsius from -200c to +1300c 
• Easy installation.   

EGT Probe:

• Probe Material : High quality Stainless Steel
• Probe Diameter : 5mm (0.2”)
• Probe Length : 80mm (3.15”) 
• Threads : 1/8” NPT Adjustable Compression Fitting
• Cable Length : 3 Meters
• Cable Insulation : Fiberglass braiding with stainless steel overbraiding
• Material : Stainless Steel
• Threads : 1/8” NPT
• Outer Diameter : 0.5" (12mm)
• Length : 0.6" (15mm)

Colour of display may vary. 

THESE GAUGES WILL NOT WORK ON 24v. 

Land Rover 300 TDI EGT sensor probe boss EGR blanking plate.

This plate allows you to fit an EGT temperature sensor probe without having to remove the exhaust manifold to drill and tap it.

This kit comes with:

1 x stainless steel plate, 8mm thick, tapped and ready to fit. 
2 x fixing screws. 

Emergency 6 Tyre Traction Cable Ties for Wheels

Tie Length - 900mm
For alloy and aluminium rims up to 22in

Fully adjustable to fit any tyre size

Easy to install even while your vehicle is stuck in the snow, mud or ice. 

NOT designed for driving long distances
Only for use when your vehicle is stuck and driven for 5-10 car lengths or until you are safe. 

A great little gift for the car enthusiast in your life! Complete with stainless steel funnel.....

Available in Black, Blue, Green or Silver.

Stainless Steel Hip Flask:

Capacity: 5oz

Size: approx. 9.5 x 7.5 x 2.5cm (H x W x T)

Land Rover, Range Rover, Series, Defender Discovery, Brake Caliper Rebuild Tool (Land Rover tool number DA1153)

The most akward part of rebuilding a set of Land Rover brake calipers is fitting the dust seal after the pistons have been fitted.

This kit has been designed and made to help you! It is supplied with the tool to fit 41mm and 44mm pistons and comes complete with a heavy-duty piston spreader to allow the seals to be pushed into place evenly.

Suitable for Land Rover and Range Rover models with disc brake calipers that have 41 or 44mm pistons.

Kit Contains:

• Heavy Duty Piston Spreader
• 41mm Seal Cap
• 44mm Seal Cap

Land Rover 200/300 Tdi Tuning Package 

With this combination of tuning products, you can add an extra 25% output power to your engine.

The complete kit contains:

• 1x Fourby Boost Pin
• 1x Fourby Boost Ring ®
• 1x Fourby Turbo Boost Controller

Fits all 200 or 300 Tdi's: Defender, Discovery, Range Rover.

These are performance upgrades. They will transform the output power of your engine. Fitting to your engine is at your own risk. 

Each item is available to purchase seperately. 

Turbo Boost Controller for 200 / 300 TDi Engines

Full Installation kit designed in house for Tdi engines, everything you need is in the pack.

Simple 15 minute fit for awesome extra power..!

This kit allows you full control over your turbo charger, allows you to dial in the boost to just the right amount to suit your fueling.

KIt contains:

• Boost Controller
• High pressure pneumatic pipe
• Silicone Pipe 
• High quality replacement spring clips
• Installation Instructions

Completly transform your ride, add this Fourby Boost Control kit with a Fourby Boost Ring and a Fourby Boost pin (also available to buy as a complete Tuning Package).

This is a tuning product, install at your own risk.

*Colours of pipe and Boost Controller may vary. 

The Land Rover Discovery 300 Tdi EGT Gauge and Frame package deal.

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x Custom Fit Frame designed to fit perfectly into a Discovery dash, fitting an EGT display with a panel cut 79x43mm.

These items are available to purchase separately. 

Colour of EGT display may vary

The Land Rover Discovery 300 Tdi EGT Gauge and Frame package deal, including 300 Tdi EGT Probe Boss Blanking Plate

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x Custom Fit Frame designed to fit perfectly into a Discovery dash, fitting an EGT display with a panel cut 79x43mm.
• 1x 300Tdi EGT probe Boss blanking plate & fixings. 

Colour of EGT display may vary

THESE GAUGES WILL NOT WORK ON 24v. 

These items are available to purchase separately.