The Fourby Defender Auxiliary Centre Dashboard, USB Switch Panel

Lots of Land Rover owners want to have additional auxiliary features to their vehicle, especially if they intend on taking their vehicle off-road or on an expedition overland trip.

However, if you want to have lights on your light bar, a winch, a split charge system, a Kenlowe fan, recovery beacons or work lights etc, you may hit a problem.There is a lack of dash space to fit your auxiliary electric switches. 

Fourby has manufactured this sleek, dash panel as a direct replacement for the OEM Defender panel. 

The panel is made from stainless steel

We designed the panel to incorporate 3 x 16A, round, 20mm LED rocker switches which we include with the switch panel. One in each of the colours: Red, Amber, Green

Then we added a 3Amp USB power supply, that's plenty of charge for your iPad, satnav or phone.

Marine Grade 316 Stainless Steel Kit 

 2x Bushcables™ assemblies.

Defender CSW Second Row Door Extensions.

These clever brackets increase the angle at which the second row doors will open.

Designed to allow greater access to the second row of side doors for a 110 or 130 (including Double Cab Utility and Station Wagon). Doors will open to almost 90 degrees when fitted. Very simple and easy to fit.

These 'all stainless steel' door extensions are a simple bolt swap for the originals, they will never corrode and will look good for years to come.

Fourby has found the perfect alternative to the cumbersome rear roof rack/tent access ladder:

Side Steps Ladder! 

These steps are superb, highest quality marine grade stainless steel folding mast steps. 

They can be used in many applications where a small folding step or grab handle is required.

Not only for use on land Rovers, but good for use on boats, caravans, motor homes & anywhere else that you need safe access to climb.

On a big expedition roof rack, especially with a tent up top, you can't always access the whole of the rack from the back of the vehicle. These steps allow you to quickly access the roof rack from the side, without having to have your door open to stand on a seat, or having to hang out of the window to grab whatever is above you on the rack.

When your roof tent is erected, you certainly can't get to the roof rack unless you clamber onto the bonnet. 

These steps will not affect the overall silhouette of the vehicle very little given that they will protrude approx 85mm with bracket when in use and approx 22mm when in folding position. 

This listing is for a Pack of 2 Steps

Fully spring loaded so stay open when pulled out.  

• Made from Marine Grade 316 Stainless Steel.
• Highly polished
• Very strong and solid construction.
• Anti-Slip surface on foot plate
• Two M8 Mounting Holes.
• Base Size approx 110 mm x 47mm.
• Step Size approx 50 x 85 mm
• Weight approx 400 grams

Land Rover 300TDi Replacement Serpentine Belt Tensioner Bearing

This high quality bearing will replace the one inside the belt tensioner

Fits all 300TDi engine derivatives, Defender, Discovery and Range Rover.

Simple, and a few minutes to replace, this bearing should kill off the squeal you experience from the front of your engine.

Before you change your water pump, alternator, power steering pump etc... Try changing the tensioner bearing.

Land rover will not sell you this bearing separately, a whole tensioner unit will set you back £70

Instructions for fitting below

Dont be fooled by cheap bearings sold elsewhere....Remember - Buy Cheap, Buy Twice!!!

Cree LED amber strobe recovery breakdown beacons.

High Visibility LED strobes for your vehicle. 

For both day and night time use, these strobes catch attention and are perfect for a recovery or emergency situation.

We've all had it happen.... You're on your way back from a days playing and your mate breaks down, You pop the bonnet at the roadside. 

These highly visible LED amber Strobes wire easily into your cars electrics and warn other motorists of a problem ahead from many hundreds of metres back.

Essential kit for both day and night time use. 12v or 24v circuit with low current draw. 

Choice of 18 flash patterns.

Land Rover Defender 3 way Aluminium Dashboard Switch Panel.

We may have over-engineered this one!

This is a direct replacement for the standard plastic hazard switch panel which tends to go very brittle over time, causing it to break away. This is the panel that lives on most of the earlier Defender dashboards.

Our panel stands out from the stainless steel plates on the market because it is designed as an exact replica of the original.

Importantly, this means that it includes the recessed machining on the back side of the panel which holds the switches in place.

As a result, the switches fit snug and secure into the panel and do not move around once the panel has been fixed in place.

Are your Defender dashboard lights giving off a dull glow? Its probably because of the grim green bulbs inside....

Here we have 5 x replacement LED Bulbs specifically designed to give off a brighter, whiter light to your dashboard clocks and dials. 

Use 2 in your Speedo and 1 in each of your dials. 

(If you have an analogue time clock, please see our other Defender LED listing which is specific to that type of bulb arrangement). 

These bulbs are 100% brand new & high quality

• High intensity LED
• High tech, super bright LED and Low temperature, lowest power-consumption
• Long service life
• Easy installation, no any modification need, just plug & play
• Suitable for most vehicles/boat with wedge base 12V
• Easy to replace Standard 194 168 501 Or W5W Wedge base Model

Specifications:

• Light color:  White
• Working voltage:  DC 12V

Suitable for Defender 300tdi or earlier

If you need lots of power for winching or just want a bullet proof dual battery system then this is the answer for you.

The 300 Tdi second/twin Alternator Mount Kit with all fixings and Belt.

Suitable for all Discovery, Defender or Range Rover fitted with a 300 Tdi Engine.

This product has been carefully developed and engineered to allow you to mount a second alternator in the old aircon compressor position, to either charge auxiliary batteries instead of a split charge system or to maximise your charge current on winch challenge vehicles.

Manufactured from high grade steel and fully zinc plated for high electrical conductivity and resistance to corrosion and chips. 

This mount exceeds painted versions. Because is it electro plated, there is no requirement for any additional earth strap.