D2 Multi-function USB Clock Kit

This is a multifunction clock to replace the original clock in your dash.

Green LED as pictured.

features

• Time
• Date
• Voltage gauge
• Temperature 1
• Temperature 2
• 4 x 2A High Speed iPhone compatable USB charging ports

Suppied in printed kit form for self assembly. 

Uses the existing Discovery Wiring loom.

Basic tools required

Easy to follow instructions

D1 Multi-function USB Clock Kit

This is a multifunction clock to replace the original clock in your dash.

Green LED as pictured.

features

• Time
• Date
• Voltage gauge
• Temperature 1
• Temperature 2
• 4 x 2A High Speed iPhone compatable USB charging ports

Suppied in kit form for self assembly.

Basic tools required

Easy to follow instructions

Use the Thermowell (here) if you want to use this clock as a 300tdi Coolant temp guage

Great for charging ancillary items in the boot of your vehicle when overlanding, or for use by the rear seat passengers. 

Fourby have created rear charging points using this USB Panel, complete with 4 x 2A High Speed (Apple compatible) USB charging ports. 

Unique to Fourby, this bespoke panel fits neatly in the rear of the Land rover Discovery 2, just in front of where the rear seats are fitted.

The original panel simply pops off, and can be replaced by this sleek, colour matched variant. 

Easily picks up existing power wiring in that location

Add another security level with our GPS tracker suitable for your Land Rover

This feature packed GPS tracker is simple to install and includes a SIM card for UK network for out of the box connectivity.

No contracts, just a one off payment for the tracker and a pay as you go SIM card, (typicaly £5* per month) 

Features

• Programming via SMS
• GPS location tracking via the internet or mobile phone
• Keyfob Remote control 
• Alarm Function
• Detects open doors
• Detects movement
• Detects Ignition power up
• Remote control Fuel shut off, via SMS command from mobile phone.

​Specification:

Type: GPS,Tracker
Network: GSM/GPRS
GPS Bands : GSM 850/900/1800/1900MHz
GSM/GPRS Module: Simcom300d or Simcom340d
GPS Chip: SIRF3 chip
GPS Sensitivity: -159dBm
GPS Accuracy: 5m
GPS Start time: Cold status: 45s, Warm status: 35s, Hot status: 1s
Voltage of car power system: 12 V -24V 
Backup battery: Chargeable 3.7V 800mAh Li-ion battery
Storage Temp. -40 to +85
Operation Temp. -20 to +65
 

12v to USB Roof Tent Charging/Power Module.

Everyone needs somewhere to charge their USB device. 

So, we came up with a solution - create a charging point inside your roof tent or awning for your USB power needs! 

Exclusive to Fourby, designed and manufactured by us in the UK, this handy device clips to your roof tent or awning pole. 

This USB module converts 12v into USB power and is designed to live full time inside your roof tent with it's tiny form factor.

It will charge iphones and ipads and would also power LED reading lights or strip lights, 

2m cable included designed for anyone creating  a 12v lighting or power scheme.in their vehicle/expedition trailer

This little pin drops into your fuel pump in replacement of the original.

The ramp angle has been carefully researched giving perfomance gains on 200tdi and 300tdi engines.

Takes 10 minutes to fit. 

Morgan Hill developed this boost pin with his experience as a diesel engineer for Bosch.

It's ramp angle has been carefully calculated for Land Rover engines and the characteristics required for driving a Land Rover.

Be aware of copies which are not made with the same tolerance or incorrect grade of steel. 

Made in Sweden

This is a tuning product. By fitting this, you will elevate the level of tune in your engine. Running higher cylinder pressures will expose any engine weaknesses. Fit this product entirely at your own risk. We recommend fitting an "Exhaust Gas Temperature" guage so that you can monitor your engine and react accordingly.

We have the UK distribution for the Morgan Hill Boost Pin. Trade Enquiries welcomed.

Further Pump Tweaking can be found here

A replacement key shell for the Land Rover Discovery Series II.

Supplied with a key blank blade per key for if you want to get a new key cut, or simply remove your existing key blade and snap it into this new shell.

Replacing the key shell is easy and only takes a couple of minutes. 

Simply snap open the cover, remove the circuit board, replace the battery then snap the circuitboard into the new shell

The key can be removed easily with Pliers from the existing shell and snapped into the new shell, or use the supplied blank and get it cut.

Land Rover 300TDi Replacement Serpentine Belt Tensioner Bearing

This high quality bearing will replace the one inside the belt tensioner

Fits all 300TDi engine derivatives, Defender, Discovery and Range Rover.

Simple, and a few minutes to replace, this bearing should kill off the squeal you experience from the front of your engine.

Before you change your water pump, alternator, power steering pump etc... Try changing the tensioner bearing.

Land rover will not sell you this bearing separately, a whole tensioner unit will set you back £70

Instructions for fitting below

Dont be fooled by cheap bearings sold elsewhere....Remember - Buy Cheap, Buy Twice!!!

These LED bulbs are a direct replacement for the standard interior light bulbs on Discovery's.

With the dark nights setting in these bulbs really light up your interior..!

Sold in a set of 3