Landylubber brings to you another useful addition to your off road vehicle and kit.

The 12v twin handset Wireless Winch Remote

As any 4x4 owner knows, getting stuck in any muddy or watery situation is all part of the fun but the swift, safe recovery of your vehicle is paramount.

This winch remote is easy to install and works with most models and types of winches such as Tuff Stuff, Recon Recovery winch, Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog and many other brands of self-recovery winches.

This is the latest heavy duty long range model which can work up to a distance of approximately 50ft without the need for cables or switches.

Just press the remote transmitter and you?re ready to operate your winch!

Features:

• Remote size: approx 45 x 105 mm
• Receiver size: approx 45 x 60 mm
• Power voltage: 12V
• Remote range up to 50ft
• Long life transmitter
• Battery and power save circuit

This kit is of high quality. It has its own visual indicator light which shows remote operation.

What?s included in this kit?

• 2 x Remotes
• 1 x Receiver with connectors
• English user manual with trouble shooting guide

Download the Instructions below:

Winch Remote Instructions1.pdf

Winch Remote Instructions2.pdf

Fourby has found the perfect alternative to the cumbersome rear roof rack/tent access ladder:

Side Steps Ladder! 

These steps are superb, highest quality marine grade stainless steel folding mast steps. 

They can be used in many applications where a small folding step or grab handle is required.

Not only for use on land Rovers, but good for use on boats, caravans, motor homes & anywhere else that you need safe access to climb.

On a big expedition roof rack, especially with a tent up top, you can't always access the whole of the rack from the back of the vehicle. These steps allow you to quickly access the roof rack from the side, without having to have your door open to stand on a seat, or having to hang out of the window to grab whatever is above you on the rack.

When your roof tent is erected, you certainly can't get to the roof rack unless you clamber onto the bonnet. 

These steps will not affect the overall silhouette of the vehicle very little given that they will protrude approx 85mm with bracket when in use and approx 22mm when in folding position. 

This listing is for a Pack of 2 Steps

Fully spring loaded so stay open when pulled out.  

• Made from Marine Grade 316 Stainless Steel.
• Highly polished
• Very strong and solid construction.
• Anti-Slip surface on foot plate
• Two M8 Mounting Holes.
• Base Size approx 110 mm x 47mm.
• Step Size approx 50 x 85 mm
• Weight approx 400 grams

We all know driving is great fun but there are times when you are out on your Land Rover adventures, when you just want to stop and take in the beautiful scenery, watch a Buzzard overhead or have a nice warm cuppa!

We designed and manufactured these shelves to fit onto the rear door of your vehicle for that very reason.

Cut from aluminium chequer plate and nickel plated steel for corrosion resistance, this handy shelf will make your life so much easier than playing the balancing act on the rear bumper!

This shelf is ready made with hinges and chains attached. Simply screw into your back door and add the drop-lock connector and you?re ready to go.

Within the assembly kit, we also include the Antiluce drop-lock connector and a set of self drilling mounting screws, which makes for easy and quick installation.

We thought this one through... The shelf is the perfectly sized to accommodate one of those little gas camping stoves. (36cm x 27cm). 

20x Land Rover Wheel Nut Indicators 

We've lost count of the amount of trips we've been on where wheel nuts come loose on a vehicle. 

We believe that it you should be fastidious about torquing your wheel nuts to the correct value, but we know that this doesnt mean that they dont come loose. 

If it hasn't happened to you then it's just a question of time

When your wheel nuts come loose, at the very least you get a funny rumbling sound. You can wreck your wheel studs, ovalize the holes in the wheels, or at worst, a wheel could come off totally; which could be catastrophic. 

Here we have a set of 20 x Wheel nut indicators.

Loose wheel nut indicators are used extensively by the transport industry as an enhancement and development of fleet safety roadworthiness procedures, daily walk-round inspection and defect reporting and scheduled maintenance requirements.  Its use allows accurate monitoring for loose wheel nuts and helps prevent wheel hub damage or the loss of a road wheel should a wheel nut loosen. They are a visual aid to the driver. 

Application:

The wheel nut indicator is fixed to the wheel nut by gripping the six corners of the hexagon of the wheel nut. When the wheel is being fitted out the pointers should be aligned and set in a recognisable pattern. Should a wheel nut loosen off, the wheel nut indicator has no option but to move with the nut and so break the recognisable pattern that was set, thus indicating the wheel nut has begun to rotate and therefore to loosen.

• 1x Timing case cover
• 1 x fitted elbow
• 3x Stainless Steel Button Head Machine screws
• Length of Pneumatic Nylon Pipe 
• 1 x push fit Y connector for easy splicing into your existing breather pipework

Also known as Anchor Dee Rings, these are great for holding things in place in the back of vehicles, on boats, caravans, campervans or in the garage at home. 

We bolted 4 of these to the floor of our Land Rover Discovery and it was one of the best things we ever did! Using rachet straps, we were able to secure our tool box, onboard fridge and a host of other things. 

Very useful for tradesmen who need to secure things in the back of their vans too. 

We think they are worth their weight in gold! 

Made from galvanized steel they are strong and sturdy, welded on the ring for added strength, unlike others on the market. 

If you are one who likes to knock it in and out of diff lock as you read the trail ahead, then this is for you!

Used to extend the height of the gear lever following a body lift.

You may notice that the transfer gear lever will be a bit shorter. Return it to it's previous height using our extender.

Fitting Instructions

Simply unclip the gaiter, unscrew the lever, screw in our extension and then re-assemble.