• Two 356mm(14") separate straps hold round objects up to 381mm (15”) in diameter.
• Holds equipment measuring up to 711mm (28”) in linear distance.
• Each clamp supports a safe working load of 68kg. (150lbs) with a break-strength of 176kg. (300lbs).
• Two clamps support 136kg with a break-strength of 272kg (600lbs).
• Each half of the clamp mounts with four M4 (#10) screws or bolts.
• Mounting Area: 51mm x 51mm (2” x 2”).

Use with the Original QUICK FIST clamp #10010 (sold separately) to mount a flashlight, shovel, axe, high lift jack or other tools from 1" to 2.25" (25 to 57mm) in diameter to a roll bar.
Use with the SUPER QUICK FIST clamp #20020 (sold separately) to mount a fire extinguisher, air tank, nitrous tank or other tools from 2.5" to 9.5" (64 to 241 mm) in diameter to a roll bar.
The safe working load for two QUICK FIST Roll Bar Mounts on roll bars less than 1.5" in diameter is 50lbs. Roll bars 1.5" in diameter or larger, the safe working load is 100lbs.        

2 Clamps Per Package

Fits all roll bars from 1? to 2.5? (25 to 64mm) in diameter

Made of heavy duty transportation grade rubber, these clamps are not affected by hot or cold climates and are UV resistant. Much better than bungee cord, webbing or strops which are liable to become weathered and weak over time.

Holds objects 1" to 2.25" (25mm to 57mm) in diameter

Mounts easily to keep tiller arms, kayak paddles, dinghy oars, shovels, axes, hoses, rifles/shotguns, fishing gear and other tools or implements securely in place.

Use on Narrow boats, Cruisers, caravans, work vehicles, off road trucks, military equipment, law enforcement vehicles, fire trucks, 4x4s, ATVs, RVs or on any wall.

Can also be used as a pipe stand-off (particularly suitable for marine applications, as the QUICK FIST will not rust or corrode). Do not use on exhaust pipes.

Each clamp supports approximately 22lbs (10kilos).

To use the Quick Fist Clamp

1. Use #10 bolt or screw to fasten. Do not over tighten.

2. QUICK FIST can be mounted with the strap facing in any direction.

3. To Clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat

4. For certain applications, like roof racks with round tubing, you can install the QUICK FIST clamps using hose clamps. Make sure you center the hose clamp on the plastic washer to avoid cutting into the rubber clamp

These are great for use as a Tiller Arm Mount on a Narrow Boat or as Paddle Holders for your Kayak, Canoe or Dinghy. 

Suitable for cargo control on 4x4s, trailers, roof racks, motorcycles, campervans, boats or inside garages. In fact, anywhere you need an easy tie down solution.

They stretch and flex, acting like a shock absorber, keeping your load secure. 

Shock Straps are a unique shock absorbing tie down that is made to keep tension on the strap and your load secure.

When road vibrations cause loads to shift and settle, other tie downs can loosen and become unsafe. Under these conditions, the Shock Strap stretches acting like a shock absorber and contracts with the load keeping it secure. Even in extremely rough road conditions you won’t have to pull over to make sure that your tie down is secure.

The strength of the product is in its ability to maintain constant pressure on the strap when hitting bumps or having side pressure applied to it.