This kit is suitable for 300 Tdi engines. 

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x 300Tdi EGT probe Boss blanking plate & fixings. 

These items are available to purchase separately. 

Colour of gauge may vary. 

THESE GAUGES WILL NOT WORK ON 24v. 

Add another security level with our GPS tracker suitable for your Land Rover

This feature packed GPS tracker is simple to install and includes a SIM card for UK network for out of the box connectivity.

No contracts, just a one off payment for the tracker and a pay as you go SIM card, (typicaly £5* per month) 

Features

• Programming via SMS
• GPS location tracking via the internet or mobile phone
• Keyfob Remote control 
• Alarm Function
• Detects open doors
• Detects movement
• Detects Ignition power up
• Remote control Fuel shut off, via SMS command from mobile phone.

​Specification:

Type: GPS,Tracker
Network: GSM/GPRS
GPS Bands : GSM 850/900/1800/1900MHz
GSM/GPRS Module: Simcom300d or Simcom340d
GPS Chip: SIRF3 chip
GPS Sensitivity: -159dBm
GPS Accuracy: 5m
GPS Start time: Cold status: 45s, Warm status: 35s, Hot status: 1s
Voltage of car power system: 12 V -24V 
Backup battery: Chargeable 3.7V 800mAh Li-ion battery
Storage Temp. -40 to +85
Operation Temp. -20 to +65
 

High quality, high visibility Cree LED amber strobe recovery breakdown beacons.

For both day and night time use, these strobes catch attention and are perfect for a recovery or emergency situation.

We've all had it happen.... You're on your way back from a days playing and your mate breaks down, You pop the bonnet at the roadside. 

These higly visible LED amber Strobes wire easily into your cars electrics and warn other motorists of a problem ahead from many hundreds of metres back.

Essential kit for both day and night time use. 12v or 24v circuit with low current draw

Choice of 18 flash patterns via wiring on LED strobe module.

Land Rover 300 TDI EGT sensor probe boss EGR blanking plate.

This plate allows you to fit an EGT temperature sensor probe without having to remove the exhaust manifold to drill and tap it.

This kit comes with:

1 x stainless steel plate, 8mm thick, tapped and ready to fit. 
2 x fixing screws. 

12v to USB Roof Tent Charging/Power Module.

Everyone needs somewhere to charge their USB device. 

So, we came up with a solution - create a charging point inside your roof tent or awning for your USB power needs! 

Exclusive to Fourby, designed and manufactured by us in the UK, this handy device clips to your roof tent or awning pole. 

This USB module converts 12v into USB power and is designed to live full time inside your roof tent with it's tiny form factor.

It will charge iphones and ipads and would also power LED reading lights or strip lights, 

2m cable included designed for anyone creating  a 12v lighting or power scheme.in their vehicle/expedition trailer

A Crank Shaft locking tool & pulley puller. 

An essential tool for changing the timing belt, especially on automatic vehicles. 

(Colour of case may vary)

This EGT gauge kits come with a 1/8 NPT type K thermocouple EGT probe that can be installed to either your exhaust manifold or exhaust pipe also comes with weld on bung for alternative installation on the header

Specification 

Gauge: 

• Dimensions: 79mm x 43mm x 25mm.
• 12v DC connection
• Super Fast Response time   
• Temp Range: Celsius from -200c to +1300c 
• Easy installation.   

EGT Probe:

• Probe Material : High quality Stainless Steel
• Probe Diameter : 5mm (0.2”)
• Probe Length : 80mm (3.15”) 
• Threads : 1/8” NPT Adjustable Compression Fitting
• Cable Length : 3 Meters
• Cable Insulation : Fiberglass braiding with stainless steel overbraiding
• Material : Stainless Steel
• Threads : 1/8” NPT
• Outer Diameter : 0.5" (12mm)
• Length : 0.6" (15mm)

Colour of display may vary. 

THESE GAUGES WILL NOT WORK ON 24v. 

Land Rover, Range Rover, Series, Defender Discovery, Brake Caliper Rebuild Tool (Land Rover tool number DA1153)

The most akward part of rebuilding a set of Land Rover brake calipers is fitting the dust seal after the pistons have been fitted.

This kit has been designed and made to help you! It is supplied with the tool to fit 41mm and 44mm pistons and comes complete with a heavy-duty piston spreader to allow the seals to be pushed into place evenly.

Suitable for Land Rover and Range Rover models with disc brake calipers that have 41 or 44mm pistons.

Kit Contains:

• Heavy Duty Piston Spreader
• 41mm Seal Cap
• 44mm Seal Cap

Land of Rope & Glory!

A genuine dyneema in red, white & blue rope.

10mm and 100ft. 

The perfect accesory to your winch! 

This little pin drops into your fuel pump in replacement of the original.

The ramp angle has been carefully researched giving perfomance gains on 200tdi and 300tdi engines.

Takes 10 minutes to fit. 

Morgan Hill developed this boost pin with his experience as a diesel engineer for Bosch.

It's ramp angle has been carefully calculated for Land Rover engines and the characteristics required for driving a Land Rover.

Be aware of copies which are not made with the same tolerance or incorrect grade of steel. 

Made in Sweden

This is a tuning product. By fitting this, you will elevate the level of tune in your engine. Running higher cylinder pressures will expose any engine weaknesses. Fit this product entirely at your own risk. We recommend fitting an "Exhaust Gas Temperature" guage so that you can monitor your engine and react accordingly.

We have the UK distribution for the Morgan Hill Boost Pin. Trade Enquiries welcomed.

Further Pump Tweaking can be found here