Land Rover 200/300 Tdi Tuning Package 

With this combination of tuning products, you can add an extra 25% output power to your engine.

The complete kit contains:

• 1x Fourby Boost Pin
• 1x Fourby Boost Ring ®
• 1x Fourby Turbo Boost Controller

Fits all 200 or 300 Tdi's: Defender, Discovery, Range Rover.

These are performance upgrades. They will transform the output power of your engine. Fitting to your engine is at your own risk. 

Each item is available to purchase seperately. 

The Land Rover Discovery 300 Tdi EGT Gauge and Frame package deal, including 300 Tdi EGT Probe Boss Blanking Plate

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x Custom Fit Frame designed to fit perfectly into a Discovery dash, fitting an EGT display with a panel cut 79x43mm.
• 1x 300Tdi EGT probe Boss blanking plate & fixings. 

Colour of EGT display may vary

THESE GAUGES WILL NOT WORK ON 24v. 

These items are available to purchase separately. 

The Land Rover Discovery 300 Tdi EGT Gauge and Frame package deal.

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x Custom Fit Frame designed to fit perfectly into a Discovery dash, fitting an EGT display with a panel cut 79x43mm.

These items are available to purchase separately. 

Colour of EGT display may vary

This kit is suitable for 300 Tdi engines. 

Included in this kit is:

• 1x Exhaust Gas Temperature Probe. A panel mount 12v digital accurate EGT gauge including weld in bung and blanking plate.
• 1x 300Tdi EGT probe Boss blanking plate & fixings. 

These items are available to purchase separately. 

Colour of gauge may vary. 

THESE GAUGES WILL NOT WORK ON 24v. 

This clever little pump screws straight onto the top of an oil bottle, and the barbed fitting at the other end of the hose holds nicley into the filler port.

Takes the mess out of oil changes, when filling diff's and gearboxes

A new Boost Pin to our range! The Fourby Boost Pin is made exclusively for us in the UK. 

We have been working with our suppliers, to bring to you a rival boost pin but with a mid range price point. 

Machined to give the same performance as the Morgan Hill pin and fully hardened to the spec of the original Bosch Pin. 

Remember this is a performance product and is fitted at your own risk. 

This little pin drops into your fuel pump in replacement of the original.

The ramp angle has been carefully researched giving perfomance gains on 200tdi and 300tdi engines.

Takes 10 minutes to fit. 

Morgan Hill developed this boost pin with his experience as a diesel engineer for Bosch.

It's ramp angle has been carefully calculated for Land Rover engines and the characteristics required for driving a Land Rover.

Be aware of copies which are not made with the same tolerance or incorrect grade of steel. 

Made in Sweden

This is a tuning product. By fitting this, you will elevate the level of tune in your engine. Running higher cylinder pressures will expose any engine weaknesses. Fit this product entirely at your own risk. We recommend fitting an "Exhaust Gas Temperature" guage so that you can monitor your engine and react accordingly.

We have the UK distribution for the Morgan Hill Boost Pin. Trade Enquiries welcomed.

Further Pump Tweaking can be found here

Land Rover, Range Rover, Series, Defender Discovery, Brake Caliper Rebuild Tool (Land Rover tool number DA1153)

The most akward part of rebuilding a set of Land Rover brake calipers is fitting the dust seal after the pistons have been fitted.

This kit has been designed and made to help you! It is supplied with the tool to fit 41mm and 44mm pistons and comes complete with a heavy-duty piston spreader to allow the seals to be pushed into place evenly.

Suitable for Land Rover and Range Rover models with disc brake calipers that have 41 or 44mm pistons.

Kit Contains:

• Heavy Duty Piston Spreader
• 41mm Seal Cap
• 44mm Seal Cap

We loved this little oven so much, we decided to stock them...This is a new and improved version of the 12v oven! 

Product Description
Fast Food takes on a new meaning with the Road Chef. This portable, lightweight, 12 volt oven can cook, bake and warm foods while you travel.
Simply load the Road Chef up with pies, pasties, sausage rolls, pizzas, hotdogs or a pre-prepared meal and plug into your car, set the timer and while you are driving or parked, your meal is being heated or cooked.

Features

- Heat a meal on the move 
- Fitted with a 2 hour timer to protect battery 
- 12 Volt DC 8.5 Amp 
- Insulated stainless steel 
- Manufactured and designed in Australia 
- 190 degrees celcius+ after initial warm up

External Dimensions
Height 190mm
Width 320mm
Depth 280mm

Internal Dimensions
Height 100mm
Width 265mm
Depth 250mm

Specifications
- Insulated Steel Body   
- 12 volt DC 8.5 Amp 120 watts 
- Fitted with 2 hour timer 
- Free standing or mounted

Ideal for: 
- 4x4 Activities 
- Camping 
- Tradespeople 
- Transport 
- Caravans 
- Boats 
- Touring 
- Farmers, etc

Please Note: As this unit draws 8.5 Amps. For best results, this unit needs to be hard wired. 

8.5A is a serious power draw, we suggest a large battery bank if you intend to use this oven while stationary and while not getting charge from the vehicle engine. 

Travel Buddy