Landylubber brings to you another useful addition to your off road vehicle and kit.

The 12v twin handset Wireless Winch Remote

As any 4x4 owner knows, getting stuck in any muddy or watery situation is all part of the fun but the swift, safe recovery of your vehicle is paramount.

This winch remote is easy to install and works with most models and types of winches such as Tuff Stuff, Recon Recovery winch, Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog and many other brands of self-recovery winches.

This is the latest heavy duty long range model which can work up to a distance of approximately 50ft without the need for cables or switches.

Just press the remote transmitter and you?re ready to operate your winch!

Features:

• Remote size: approx 45 x 105 mm
• Receiver size: approx 45 x 60 mm
• Power voltage: 12V
• Remote range up to 50ft
• Long life transmitter
• Battery and power save circuit

This kit is of high quality. It has its own visual indicator light which shows remote operation.

What?s included in this kit?

• 2 x Remotes
• 1 x Receiver with connectors
• English user manual with trouble shooting guide

Download the Instructions below:

Winch Remote Instructions1.pdf

Winch Remote Instructions2.pdf

Made from the highest quality, 2mm thick stainless steel, these are precision laser cut and then etched with the detail of the classic Land Rover.

De-burred to soften any rough edges, they are then finished in a brushed matt effect.

The etched key ring measure approx. 6.2cm x 3.5cm.

The chain itself is approx. 4.5cm in length.

In true Land Rover style, at the end of the chain is a stainless steel (not cheap galvanised) Bow Shackle to compliment the finish perfectly.

The Bow Shackle pin unscrews to enable you to put your chosen attachments onto the keyring.

The overall size is approx. 12.5cm. 

The perfect gift for yourself or any Land Rover enthusiast, or collector of keyrings.

We all know driving is great fun but there are times when you are out on your Land Rover adventures, when you just want to stop and take in the beautiful scenery, watch a Buzzard overhead or have a nice warm cuppa!

We designed and manufactured these shelves to fit onto the rear door of your vehicle for that very reason.

Cut from aluminium chequer plate and nickel plated steel for corrosion resistance, this handy shelf will make your life so much easier than playing the balancing act on the rear bumper!

This shelf is ready made with hinges and chains attached. Simply screw into your back door and add the drop-lock connector and you?re ready to go.

Within the assembly kit, we also include the Antiluce drop-lock connector and a set of self drilling mounting screws, which makes for easy and quick installation.

We thought this one through... The shelf is the perfectly sized to accommodate one of those little gas camping stoves. (36cm x 27cm). 

20x Land Rover Wheel Nut Indicators 

We've lost count of the amount of trips we've been on where wheel nuts come loose on a vehicle. 

We believe that it you should be fastidious about torquing your wheel nuts to the correct value, but we know that this doesnt mean that they dont come loose. 

If it hasn't happened to you then it's just a question of time

When your wheel nuts come loose, at the very least you get a funny rumbling sound. You can wreck your wheel studs, ovalize the holes in the wheels, or at worst, a wheel could come off totally; which could be catastrophic. 

Here we have a set of 20 x Wheel nut indicators.

Loose wheel nut indicators are used extensively by the transport industry as an enhancement and development of fleet safety roadworthiness procedures, daily walk-round inspection and defect reporting and scheduled maintenance requirements.  Its use allows accurate monitoring for loose wheel nuts and helps prevent wheel hub damage or the loss of a road wheel should a wheel nut loosen. They are a visual aid to the driver. 

Application:

The wheel nut indicator is fixed to the wheel nut by gripping the six corners of the hexagon of the wheel nut. When the wheel is being fitted out the pointers should be aligned and set in a recognisable pattern. Should a wheel nut loosen off, the wheel nut indicator has no option but to move with the nut and so break the recognisable pattern that was set, thus indicating the wheel nut has begun to rotate and therefore to loosen.

Do you take your Land Rover through water, either via a ford, through flood areas or river crossings via a greenlane? If yes, we would strongly recommend that you fit extended breather pipes to stop the water getting into your axles and gearbox.

We supply this kit specifically for Land Rovers, but it would fit any 4x4 that has adequate space in the engine bay. The push fit connectors allow you to easily extend your breather pipes and the self drilling screws allow mounting of the manifold in minutes. The manifold: is beautifully designed to accept your extended pipes from both axles and gearbox/transfer box and allow a single pipe to be routed up to the top of your snorkel.

This manifold assembly has been precision machined with an all aluminium construction to avoid corrosion.

It comes supplied with mounting screws which are both self tapping and self drilling. The pneumatic fittings are sealed with PTFE for full waterproofing.

The hex head screws were carefully selected to compliment the overall design of the manifold as well as ease of installation.

The pneumatic fittings supplied will fit the standard 6mm o/d pipes.

What comes in the kit? 

• 1x LandyLubber aluminium hexagonal Manifold, mounted to a backing plate
• 2x Stainless steel self drilling/self tapping screws
• 4x Pneumatic elbows, (2 for the axles, 2 for the gearboxes)
• 5x Pneumatic elbows
• 10m of nylon pneumatic hose (colour may vary)

How do I fit the kit?

Fitting a manifold is simple:

1. Mark out two punch marks at 40mm centres and use a power drill to drive in the supplied self drilling screws.

2. Undo the screws and re-attach with the manifold in position.

3. Once fitted, push in your pipes and run a single pipe up to the top of your snorkel.

4. Starting at the back axle choose whether you will a) Extend the existing pipes (the easy way) or b) Replace the pipes (more time consuming).

a.  If you opt for the easy way, just plug a connector onto the existing pipe and connect to a new pipe length to your manifold.

b. To replace the pipes, remove the banjo unions and cut off the existing pipe. Clean the banjo union so it is free from fluid/debris and press fit the new pipe to it. TIP: Before you do this, heat the new pipe in boiling water to soften it. This makes it easier to press it onto the hose tail.

Route the pipe back from the manifold to the axle or gearbox, secure the pipe, cut to length at the manifold and push fit.

When considering breathers and kits, do take some time to consider the following...

Your main gearbox takes 5 litres of MTF94 @ about £35 (R380)

Your Transfer box and Axles combined need approx. 6 litres of EP90 @ about £20

A single deep water crossing can contaminate £55 worth of oil and once the oil is contaminated, exaggerated deterioration of all these components is guaranteed.

A Fourby Breather Kit eliminates this problem in one go! 

• 1x Timing case cover
• 1 x fitted elbow
• 3x Stainless Steel Button Head Machine screws
• Length of Pneumatic Nylon Pipe 
• 1 x push fit Y connector for easy splicing into your existing breather pipework

Also known as Anchor Dee Rings, these are great for holding things in place in the back of vehicles, on boats, caravans, campervans or in the garage at home. 

We bolted 4 of these to the floor of our Land Rover Discovery and it was one of the best things we ever did! Using rachet straps, we were able to secure our tool box, onboard fridge and a host of other things. 

Very useful for tradesmen who need to secure things in the back of their vans too. 

We think they are worth their weight in gold! 

Made from galvanized steel they are strong and sturdy, welded on the ring for added strength, unlike others on the market. 

Are your Defender dashboard lights giving off a dull glow? Its probably because of the grim green bulbs inside....

Here we have 5 x replacement LED Bulbs specifically designed to give off a brighter, whiter light to your dashboard clocks and dials. Use 2 in your Speedo, 1 in the analogue clock &1 in each of your dials. 

(If you do not have an analogue time clock, please see our other Defender LED listing which is specific to that type of bulb arrangement). 

Theese bulbs are 100% brand new & high quality:

• High intensity LED
• High tech, super bright LED and Low temperature, lowest power-consumption   
• Long service life   
• Easy installation, no any modification need, just plug & play   
• Suitable for most vehicles/boat with wedge base 12V   
• Easy to replace Standard 194 168 501 Or W5W Wedge base Model

Specifications:   

• Light color:  White   
• Working voltage:  DC 12V

Suitable for Defender 300tdi or earlier